Reclosable Cable Chains for 2020 extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the result of many hours of engineering, a durable cable drag chain design with snap-on clasps.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 150
- Makes
- 0
- Views
- 999
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
PETG seems to hold up the longest, so I suggest printing it with that. Use Voron standard print settings for best results (no higher than .2 layer height or the snaps will not work).
The tabs can be cut off to make end pieces.
Each snap-cap should go on pretty easily and remove easily too, but you may have to pinch the link slightly depending on how tolerances come out for insertion/removal.
The bend radius is very tight but not so tight that it will wear your wires out. Should work on Voron printers, that's where I use them.