1 / 9
Bird Feeder, feed hole diameter 32 or 39 mm – no supports required — image 1
1 / 9

Bird Feeder, feed hole diameter 32 or 39 mm – no supports required

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two–part threaded bird feeder, no supports needed and easy to print. Choose hole size for smaller or lager birds.

Rating
0 / 5
Likes
13
Downloads
34
Makes
0
Views
174
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This bird feeder consists of two threaded parts. Assembly is super easy, and for refilling or cleaning you simply unscrew the bottom part. 

The top section has a hole for an M4 eyebolt or some other hook. I intentionally did not design a printed hook, because a metal screw or hook is much more durable outdoors. 

Dimensions: 

  • Total height: 167 mm 

  • Filament usage: approx. 200 g 

  • If you want to attract smaller birds take the 32mm version. For larger birds go with the 39mm hole. Top is the same for all models.

Printing:

  • Material: PETG; For outdoor use, I recommend not using PLA – it will deform in the sun over time. 

  • Layer height: 0.2 mm (0.4 mm nozzle) → going higher in layer height may cause issues with the overhanging parts. 

  • 3 perimeters 

  • 4 top / bottom layers 

  • Infill: 10% is sufficient 

  • No supports are needed

Tags