1 / 9
Bird Feeder, feed hole diameter 32 or 39 mm – no supports required — zdjęcie 1
1 / 9

Bird Feeder, feed hole diameter 32 or 39 mm – no supports required

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two–part threaded bird feeder, no supports needed and easy to print. Choose hole size for smaller or lager birds.

Ocena
0 / 5
Polubienia
13
Pobrania
34
Wydruki
0
Wyświetlenia
172
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This bird feeder consists of two threaded parts. Assembly is super easy, and for refilling or cleaning you simply unscrew the bottom part. 

The top section has a hole for an M4 eyebolt or some other hook. I intentionally did not design a printed hook, because a metal screw or hook is much more durable outdoors. 

Dimensions: 

  • Total height: 167 mm 

  • Filament usage: approx. 200 g 

  • If you want to attract smaller birds take the 32mm version. For larger birds go with the 39mm hole. Top is the same for all models.

Printing:

  • Material: PETG; For outdoor use, I recommend not using PLA – it will deform in the sun over time. 

  • Layer height: 0.2 mm (0.4 mm nozzle) → going higher in layer height may cause issues with the overhanging parts. 

  • 3 perimeters 

  • 4 top / bottom layers 

  • Infill: 10% is sufficient 

  • No supports are needed

Tagi