1 / 3
Creality Spacepi X4 Desiccant Drying Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a desiccant drying tray that will fit inside one side of a Creality Spacepi X4 filament dryer.
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 91
- Makes
- 2
- Views
- 1,271
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print out the two trays, base and base pins and slide components together with the base on the bottom, add the four base pins, add the lower tray and then the upper tray.
There are long print times for the base and trays due to the slow print speed.
Used:
- Polylite ABS
- Bed temp: 110C
- Nozzle temp: 265C
- Print speed: 50 mm/s
- Brim inside/outside for the base
*First print of base with outside only brim and bed temp of 100C. Print failed after 90% completion due to warping and de-cohesion of print bed. After changing settings to the above, all came out nice.