1 / 2
Hose Coupler for Lincoln Electric Welding Fume Extractor — image 1
1 / 2

Hose Coupler for Lincoln Electric Welding Fume Extractor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A hose coupler for 1-3/4" hoses used with Lincoln Electric X-Tractor

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I bought a Lincoln Electric “X-Tractor” portable welding fume extractor a few years ago.  Overall it does a pretty good job of keeping my shop from getting smoky, especially when welding steel.  The hose that is included with it is kind of short, but works OK if you are welding at a bench or on small to medium sized projects.

Currently, I am building a welded aluminum 18 foot boat.  In order to reach the entire project without needing to constantly relocate the fume extractor, I purchased a longer hose.  I guess it didn't occur to them that the user would want to put their two hoses together, since there was no means included to connect the two 1.75" hoses.  Duct tape was temporarily employed, but did not hold up to repeated repositioning.  So I whipped up this quick and dirty coupler.  Sharing it here in case somebody else might find it useful.

I printed this out of Polymaker ABS on my Voron Trident using a 0.6mm nozzle at 0.3mm layer height.  Not my most cosmetically attractive print ever, but it seems to fit the hoses well and does the job.

Tags