Rigol DHO800/900 (S) desk probe holder | Halter Messspitzen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Halter für Messspitzen von Rigol für Serien DHO800 und 900 (S) desk probe holder for Rigol series DHO800/900 (S)
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 69
- Makes
- 1
- Views
- 452
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
(English below)
@vogon hat ein nützliches Modell einer Halterung für die Messspitzen der Oszilloskop-Serien Rigol DHO800/900 (S) entworfen. Mir war die Platzierung am Arbeitsplatz jedoch zu unflexibel, weshalb ich mit Zuhilfenahme eines Modells von @Apitzalli eine individuell montierbare Klemmhalterung entworfen habe, welche beliebig an Arbeitsplatten, Regalen, Tischen und ähnlichem mit einer maximalen Plattenstärke von 37mm montiert werden kann.
Sie eignet sich für zwei Oszilloskoptastspitzen - für einen Vierkanal-Oszi werden also zwei solcher Halterungen benötigt. Dank dieser Halterungen kann der Oszi fest über der Arbeitsfläche montiert werden, während die Tastspitzen schnell greifbar auf der Arbeitshöhe verbleiben, ohne dass sie jedoch einfach herumbaumeln.
Die Halterung kann sicher auch für andere Oszilloskope bzw. Tastspitzen verwendet werden. Ich würde mich freuen, wenn ihr in den Makes/Kommentaren schreibt, bei welchen Oszi-Modellen ihr das noch verwendet habt?
Gedruckt wurde die Halterung aus einfachem PLA, was aufgrund der recht massiven Bauweise absolut ausreichend ist. Natürlich kann auch höherwertiges Filament, wie PETG, ASA, ABS, usw. genutzt werden.
Bei Bedarf kann auch ein Schutz für die Arbeitsplatte gedruckt werden. Hierfür habe ich die Vorlage von @Dennis übernommen.
Und nun viel Spaß beim Drucken :)
@vogon has designed a useful model of a holder for the measuring probes of the Rigol DHO800/900 (S) oscilloscope series. However, I found the placement at the workplace too inflexible, so with the help of a model from @Apitzalli, I designed an individually mountable clamp mount that can be mounted anywhere on worktops, shelves, tables, and similar surfaces with a maximum plate thickness of 37 mm.
It is suitable for two oscilloscope probes – so two such mounts are required for a four-channel oscilloscope. Thanks to these mounts, the oscilloscope can be securely mounted above the work surface, while the probes remain within easy reach at working height without simply dangling around.
The mount can certainly be used for other oscilloscopes or probes. I would be delighted if you could write in the makes/comments which oscilloscope models you have used it with.
The mount was printed from simple PLA, which is absolutely sufficient due to its rather solid construction. Of course, higher-quality filament such as PETG, ASA, ABS, etc. can also be used.
If necessary, a protective cover for the worktop can also be printed. For this, I used the template from @Dennis.
And now have fun printing :)