Multi-Colour Heart Locket (No AMS Needed!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heart-shaped locket! It can be printed in multi-colour without AMS and works great as a prop, jewellery or pendant.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 88
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
My school was staging a production of Anne, and the team needed a locket prop. I could not find a design that looked right, so I decided to create one myself.
I wanted it to be multi-colour, but my AMS (Bambu’s multi-color system) broke, so I created this heart-shaped locket that can be printed in two colours without AMS. The two-tone effect is achieved by separating the pattern layer from the locket body. To print in multi-colour, simply add a manual pause after the first 2–3 layers, swap filament, and resume the print.
For example, in Bambu Studio using the Standard 0.2 mm profile, you can pause at 0.6 mm. The printer will stop once the first two layers are done, you change filament, press continue, and you will get the same result shown in the photos.
The locket is held closed by friction. It may feel slightly tight the first time you open it, but after a few openings it loosens up and works smoothly.
https://www.starryodyssey.com/design/multi-colour-heart-locket