1 / 4
Mini drill chuck bit handle with drill holder for 6 drills <3mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is another drill chuck handle BUT with a holder in the handle to keep up to 6 drills
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 49
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I searched for a drill chuck and the possibility to store 6 fine drills in the handle.
I could not find one that fit my needs
- handle diameter <18mm to fit in my RC-Tool Box (not ready yet ;)
- store at least 1 drill within the handle so it is protected during non-usage
So this is it - I used very small 3x1mm magnets to hold the drills in place - not neccassery needed,
but nice as you can open the handle in any direction without losing any drill.
printed with Prusa PLA 0.4 for the shaft, 0,25 for the drill handle
Need to complete something like this
- https://www.amazon.de/dp/B0C5MNRV27
- https://www.supermagnete.at/scheibenmagnete-neodym/scheibenmagnet-3mm-1mm_S-03-01-N