1 / 1
IKEA IVAR Chair Floor Glides (Screw-on) — image 1

IKEA IVAR Chair Floor Glides (Screw-on)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple, screw-on feet for the IKEA IVAR chair. Print in Nylon to make your chairs slide smoothly and quietly

Rating
5 / 5
Likes
13
Downloads
18
Makes
3
Views
142
Reviews
2

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

These are simple feet, or glides, designed specifically for the IKEA IVAR chair. 

I found the standard IVAR chairs were difficult to slide and would catch on the floor. They'd make this grating noise when sliding on my floor because of the friction between the wood and my tiles. 

These 3D-printed feet provide a smooth, low-friction surface that allows the chairs to glide effortlessly and quietly. I printed mine using **Nylon**, and the difference is night and day. The chairs now slide perfectly without any scratching. This is a very fast print and requires no supports.

Simply print one foot for each of the four chair legs and screw them on. For those of us less experienced with wood, pre-drill the screw hole in the wood to prevent it from splitting before screwing on the glide.

My print settings

  • Printer: Prusa i3 MK3S+
  • Rafts: No
  • Supports: No
  • Resolution: 0.2mm
  • Infill: 100%
  • Filament: Nylon is highly recommended for its low friction and durability (I used Taulman3D Bridge Natural)
  • Nozzle: 0.6 (but other sizes like 0.4 will also work)

Tags