Birb feeder (bird feeder)

Winter is coming and the small birbs outside should enjoy some easy food from a suitable vending machine. It's a nice de-stresser for us humans too, simply looking out at the feathery little tweeters enjoying a nice snack.

So here it is! It uses an empty Prusament spool as a base. It'll work without it, but the spool serves as a nice place for the birds to sit.

I've included versions of the feeder fitted for either peanuts or sunflower seeds.

Print instructions:

1. Recommend printing in PETG but PLA probably works as well.
2. Recommend slicing using the provided 3mf files.
3. Print 1 x lid.
4. Print 1 x plug.
5. Print 1 x nut and bolt.
6. Print either 1 x peanut feeder or 1 x sunflower seeder.

Assembly instructions:

1. Place the feeder on an empty Prusament spool. Secure it in place with the plug.
2. Fit some thin rope through the top of the lid and make a knot to secure it in place.
3. Fill the feeder with either peanuts or sunflower seeds depending on which one you printed.
4. Slide the lid into the feeder and secure it with the printed bolt and nut.
5. Hang it outside in a suitable location.

Other notes:
This feeder was inspired by several other bird feeders here on Printables. I must stress that my feeder is a 100% original creation. I did not use any parts from other bird feeders - it is not a remix.

I would, however, like to give credit for inspiration to the following models:

• https://www.printables.com/model/36644-krmitko
• https://www.printables.com/model/35756-prusament-soda-bottle-bird-feeder