Box for a set of double pointed knitting needles (Nadelspielbox)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For storing your knitting projects safely and without risk of dropping stitches!
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 90
- Makes
- 1
- Views
- 653
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
tl;dr
|
Box for a set of double pointed knitting needles (Nadelspielbox)

This box allows you to neatly store your set of double pointed needles when you take a break from knitting. The short walls protect your stitches from slipping off the points while an opening in the long wall ensures that even your biggest project will fit. You can use it for knitting socks, hats, mittens, slippers, whatever you want!
Magnets or clips
In order to protect your needles from falling out, the box closes securely with either glued-in magnets or a clip mechanism.
![]() | ![]() |
Different sizes

Additionally, there are different sizes available for different needle sizes, each named by diameter x length. (You can, of course, also use a bigger box for smaller needles, but the sizes are calculated to comfortably fit five needles with stitches on them while not leaving too much play.)
In case you can’t find one with the right measurements, feel free to contact me and I’ll add it. Alternatively, I have included the parametric file (Shapr3D) so you can play with the variables and fit the box to your specific needs.
Bill of materials
- four round magnets, 5x2mm (optional, only for magnet variant)
Printing instructions
The model can be printed in one piece with the hinges needing the tiniest bit of breaking in. Then, you can glue in the magnets (if you chose that version) and the box is ready for use.
For best results, print in PLA with a STRUCTURAL print profile.
Parametric file
If you check out the Shapr3D file, these variables might be of interest to you:
nadel_laenge: needle lengthnadel_staerke: needle diametermagnet_durchmesser: magnet diametermagnet_staerke: magnet heightscharnier_spiel: the margin used everywhere there needs to be play

