Adapter Kärcher WD to Bosch Click & Clean
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter from Kärcher WD Series vaccum cleaner to Bosch Professional Click & Clean System
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 158
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter Kärcher WD to Bosch Click & Clean
Intro
I think, most of us have tools from different brands - for various reasons. So what we all need is adapters!
Here's one from the Kaercher WD vacuum series to the Bosch Click & Clean system. I tried several ones that exist out there but I thought you could still do better regarding tightness and safety (and maybe style). Therefore this adapter is designed to be tight by bringing a little tension on both sides. Further, it holds a little safer to the Bosch tool than other adapters by using the printed springy ring. And finally I hope that you too like the design (:
Printed Parts:
Files:
Adapter
Clip
Filaments:
whatever you like, just mind temperature resistance for your area of use
Special Print Instructions:
Make sure to use supports!
Printing on the Kaercher side recommended
3 perimeters
25% Gyroid infill
Assembly
Click the clip on the adapter.
Connect your vacuum cleaner to the adapter (this might need a little force to be pushed in position).
Install the adapter on your Bosch tool and make sure that both noses of the clip slide into the tools' holes (turn the adapter a little back an forward if needed).
I am always happy to receive feedback for improving my designs - so leave a comment if you like :)
And of course: Happy printing!