Thermal Master P3 USB-C Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
iPhone 16 Pro Max USB-C Spacer for a Thermal Master P3 Thermal Camera.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 1
- Views
- 269
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't exactly pleased with how wobbly the P3 Thermal Camera was attached to my iPhone 16 Pro Max without a Case so I made a Gap filling Spacer to go between the two that will eliminate the wobbliness in particular when adjusting the Focus Ring.
The File contains two Parts, the actual Spacer for use on the Device and the optional Cutting Jig serving as a Guide to cut the Foam in the Transport Case to the new, enlarged Size. Just insert the thick portion into the recess the Camera would go and use the thin Section overlapping the Foam as the Guide.
As for installing the Spacer - It should just slide into the Metal portion of the USB-C Connector with a faint Friction Fit causing it to stay on. If its too loose you can use double-sided Tape though that might require adjusting the Z-Height of the Model ( at least on an iPhone 16 Pro Max the Spacer was designed for the dimensions ended up Spot On so not much room left for Tape ).