1 / 2
K1 Jack (Kenwood standard)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement K1 jack for damaged cable connector
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I broke the jack on my Baofeng microphone and couldn’t find any replacement online, so I designed one myself. I used standard 2.5 mm and 3.5 mm jacks and printed a cover to hold them the correct distance apart. I tested this with my Baofeng UV-5R and my Quansheng UV-K5, and it works well with both, even though it’s a bit tight.
To screw the two halves together, I used two countersunk M2.5 screws and one flat-head screw.