Snap on CoreOne Extruder Fan Grill Cover - Remake of @IceCube Sol. cover design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to snap on extruder fan cover to shield it from strings ans debris, remake of @IceCube Sol. design.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 206
- Makes
- 13
- Views
- 622
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A redesign of @IceCube Sol. “Prusa CORE ONE/MK4 Honeycomb Fan Grill Cover (EASY INSTALL)” where I created a modifier part along with the new design of the fan cover that is now snap on using the existing screw heads and the existing holes on the fan.
Wanted a design that would be easy to take of when switching the nozzle and that one could change the size and type of the pattern. So using the CoreOne-FanGrill-Cover_SnapOn_v2.3mf file you can just change the size or pattern of the modifier infill for what you like to have.
I printed this with a 0.25 mm nozzle in Prusament Matt Black PETG to get the colour to match the extruder parts and to make the infill pattern as thin as possible for good airflow while still protecting from strings and smaller debris.
Not sure if all printers have the exact same fan and size of the holes, it should, I needed to make several small sub mm changes to make the cover stick good.
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.