Samsung A56 / A36 - rigid PETG / PLA Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick design for my new phone. High walls for extra protection. It's made so it will break instead of the phone.
- Rating
- 4.667 / 5
- Likes
- 15
- Downloads
- 394
- Makes
- 2
- Views
- 1,110
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
The backplate is 2mm thick, so it won't cover the camera bump completely. Did that so it remains a bit flexible.
It is kinda tight if you use very rigid materials, might be a bit brittle and hard to take off.
# Print recommendations
1. only 2 top layers and 0mm top shell thickness
2. (optional) only 2 bottom layers and 0mm bottom shell thickness
3. slow down your outer wall print speed
4. use semiflexible materials, PLA works but is too stiff and hard to come off, I got the best results with PETG, PCTG, COPA and PA12, though engineering filaments have worse dimensional accuracy than PLA or PETG so results may vary.
30min to 1h print - 35g of filament.
Added fuzzy_project.3mf as a Orca project with fuzzy skin modifiers, for extra hand grip.
I did not test the fit on an A36. I don't have that phone, special thanks to @AdamOn_3964497 for pointing out the errors in V2. Some help here is appreciated, just leave a comment if it fits okay or a pic if it does not.
– Update V2:
Better fit overall, better hand feel and easier installation and removal
- Update V3:
Tighter overall fit, V2 tended to loosen up after a while and the machined sides started to scratch the printed walls. It was annoying.
I redone the project and uploaded the f3d Fusion360 files so anyone can tinker with the case design. I added a couple of variables that can be easily changed in the Modify menu.