471 models
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Reference 3D model of Insta360 X3
Model updated! All parts improved! This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ food container. The filament outlets is optimized for the PC4-M6 fittings and allows the…
The X5 measures 46 x 124.5 x 38.2mm The X4 is 46 x 123.6 x 37.6mm
This is feet (legs) for the Insta360 invisible selfie sticks, remixed from Mini Tripod 150mm by DiAleksi. With this, you can give your invisible selfie stick (monopod) feet so that it can stand the Insta360 camera upright. I use this for…
The case a little bit loose, so you can resize just a bit to fit perfect.
Update: I added a v2 version which should fit a bit better. Also made it a bit bigger for better usage. When I got my Insta360 x4 I was happy to receive also the protective lens cover. When attaching it I realized, this is made for…
GoPro type mount for the new Insta360 Go 2 Print in Flex Filament Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: ColorFabb Flex Black Category: Camera
Bracket for mounting DJI Mic receiver with Insta360 X3. Update: There is a Version 3 available now. V3 utilizing Ulanzi Hummingbird Quick-Release system, so the whole mounting adapter piece can be detached from the camera setup quickly.…
Insta360x3 camera can have lens covers installed, which makes wery difficult to use stock silicone lens protector. It also slides right over the lenses, so there's a risk of scratching them. This protector has a little space between…
A simple stand for the insta360 X4 ============================================= If you would like to support my work you can buy me a coffee Wenn Sie meine Arbeit unterstützen möchten können Sie mir einen Kaffee kaufen…
this is a lens cover for the Insta360 ace pro 2. I printed in TPU 40D. (PETG might work) there are two versions: WITH: to be used with the silicone protection around the lens. WITHOUT: If you lost that original protection ring around the…
Unfortunately, the lens is unprotected on the current model. So I simply created a cover for it. Fits perfectly on the lens with TPU as filament.
Belt holder for Insta360 X4. You can carry it also with the invisible stick mounted on. Hope you guys like it. —————————————————————————— FOLLOW ME ON: ⚡ Website: https://the3dprintgeek.com ⚡ YOUTUBE:…
Canon hotshoe - Action camera mount (GoPro, Insta360,...)
A simple stand for the Insta360 X5 ============================================= If you would like to support my work you can buy me a coffee Wenn Sie meine Arbeit unterstützen möchten können Sie mir einen Kaffee kaufen…
Put a lot of work into getting this a perfect snug fit. Shouldn't interfere with any screen protectors, allows you to set phone flat on a surface too, eliminating camera bump. Screen is protected with a lip. Designed with PLA printing in…
Parameters: Printer used: Prusa MK3s Filament: PLA+ I have printed these parts with a single extruder. Imade stops to change the filament in the first 3 layers (0,2mm each). If you need a help to print in 2 color: here you have a…
i made a case for an insta360 x3 that holds two batteries and 4 micro sd card. it fits the insta360 x3 with the sheath on for some added protection for the lenses.
Vertical and Horizontal mount for Insta360 Go3. Used support for enforcers only. Enjoy! 8/20/23 UPDATE: Fixed bolt hole at bottom of vertical mount. Added new combo vertical/horizontal mount. Support for enforcers only.
The backplate is 2mm thick, so it won't cover the camera bump completely. Did that so it remains a bit flexible. It is kinda tight if you use very rigid materials, might be a bit brittle and hard to take off. # Print recommendations 1.…
A 3D scan of Insta360 ONE X2 camera for making accessories easier.
So i made these cases to fit an insta360 x3 camera with the lens guards, it has a tpu insert that holds the camera in place and should be soft enough to not damage the lens. it also should fit the camera without the guards and without the…
Unfortunatly in Armin3dp's original design there's no ultrawide version of a frame to bolt together for smaller printers, thus I made this novice mash-up in TinkerCAD of the existing versions. Simply use with the already existing…
This is a remix of https://www.printables.com/model/345795-gopro-91011-rugged-case-2-variants I used .24 layer height. The screws are M3x25mm
Desktop stand for Insta360 X4 and X5. Used just for storing camera, so it doesn't fall by accident (e.g. table shaking). Designed to be used with Ulanzi Hummingbird Quick Release cover (R079), but works ok without it. 5x2mm magnets could…
Remixed Model of the legendary “Rugged Box (Parametric)” by user Whity. I made some custom inlay to fit the following: 1x GoPro Hero 5 Session (with Frame) 1x Insta360 One R (with Frame and Lens Cover) 1x USB-C Charging Cable some loose…
My aquarium lights sit above eye level and were annoying so I made a shade that attaches with magnets. My first version was printed in PETG and warped a little with the heat, so I added some ventilation and printed these in ABS with no…
This is a lens cover for the Insta360 ONE RS 4K Boost Lens. I've designed it in Fusion 360 with a 0.15mm layer height and 0.4mm nozzle size in mind when picking dimensions. It fits perfectly after I printed it with my Prusa Mini using…
I wanted a mount that could clip to the brim of my cap to allow a first person view for my Insta360 Go 3 action camera. I wanted this primarily for taking video of my competition shooting so I could review and analyze my performance.…
Inspired by the official Insta360 GO 3/GO 3S Vertical & Horizontal Action Mount Set, this mount perfectly fits the GO 3S camera body, providing a way to securely mount the camera to a standard 3-prong action camera mount in horizontal…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your Insta360 Ace Pro camera with the best mount in FPV! Max protection with TPU in…
Update Jan '26 Originally, this design was meant to be printed standing, no supports required. However, one of the remixers found that this print orientation made the mount body too weak. While the mount never failed in my testing, I only…
After trying a few mounts and not being really satisfied with any of them, I created a mount for the Go 2 myself. Since many mounts are closed, you can insert the Go 2 only very difficult or not at all. That's why I left my mount open. I…
Not the cleanest scan since it's all either black or reflective. But should be good enough for designing mounts or adapters.
Lens remover from insta360 X4. It works with premium lens and standard lens. There is a hole to use as a keychain. I recommend you use PETG filament because it is slightly elastic
Fits (3) Insta360 X3 battery, (2-4) microSD cards and (1) spare slot for lens cloth or anything you want. It will fit inside a large bike saddle bag. See assembly instruction here:
Made a light shade for a Kessil A360x aquarium lamp. Good fit, does the job nicely! Made with Fusion360.
3 types of lens hoods: - Normal lens hood - Minimalist lens hood - Minimalist lens bumper Ideally used with Linear or 45-degree setting, the widest field of view might catch the edges of the normal lens hood. Also check out my other…
Update: There is version 3.1 with improved compatibility with another action camera mounting system. The trade off is that swapping battery on 3.1 require you to take off the mic module.…
Simple mini tripod for common action camera mounting system. Designed and tested for dji action 2. For assembly you need 3x M3x16mm screws and 3 nuts (i recommend using nuts with nylon lock for better feel and constant tension).
Quick release holder for Insta360 Selfie Stick. I use it to carry my Insta360 X3 with Selfie Stick attached on my backpack.
I searched for a battery case for my Insta360 ace pro 2 batteries but there was no model I liked so I made my own. I recommend a well tuned printer for this model as the tolerances are pretty tight so the battery doesn't move inside the…
This is my mount for 1" motorbike handlebars for the insta360 GPS Smart Remote . To prevent the bracket from twisting on the handlebars, I recommend a maximum 1mm thick rubber pad between the handlebars and the bracket. For mounting you…
This was a quick design, so its not the coolest looking thing. I just needed a hat mount for my Insta360 Ace Pro 2, so here it is. It is pretty tough when printed in PETG. There are 2 models. One with a higher mount, and another with lower.
insta360 one r SdCard Cover Buy a Coffee for Me https://ko-fi.com/pogotrainer
Inspired from : https://www.printables.com/model/1068858-insta360-x4-std-lense-guards-box
A case for storing Insta Ace Pro camera and 1 battery, 4 lens
simple mount. please understand layer line weakness before printing. small frame may show on sides if full 360
V3.1 minor update with the DJI Mic Receiver moved up so that the bottom is flushed with the Quick Release's bottom, so that the whole thing can be mounted on to something with a wide base. The downside is that the Receiver is now blocking…
Insta 360 go3s rugged box, this is different from go3 model(go3s lens is bigger). I have remix the following model: https://www.printables.com/model/528732-insta360-go-3-rugged-box and use the…
Saw this use-case while setting up Quick-Clip system on my backpack. Those parts I tried with both PLA and PETG and both seem robust enough for my cases. Did 30% or more infill with Gyroid pattern and everything seems stable. UPD…
Holder for the Insta360 GPS Preview Remote. I made this to hold the remote on the panel of my airplane but it can really be attached to any flat surface using 3M tape. I printed using colorful Varioshore TPU but any flexible filament…
You can carry the camera with the invisible stick and lens cover attached. -Metal wire from binder clip -Flat elastic band *Please remove the supports after printing
Easy to install in any helmet. Has cutouts for the mics, clips into place, is easy to take out due to the center groove and and the visor closes without any problems. With a closed visor the sound is also really good and doesn't need an…
I use a little bag with a bunch of mollo attachments on them to carry around my action cameras and accessories. I needed a good way to easily access my selfie-stick without it being in the way and taking up space inside the bag. Decided…
This is a standard mounting bracket for Insta360 ONE R. It is compatible with the original silicon lens protector. No need supports for printing (they are included in the STL). Maybe you also like my vertical case design…
Needs to be printed with flexible material. V2 goes over thumb screw so the cap doesn't get lost while camera is in use…
recommended printing only on Flexi filament
These Gridfinitycases are designed to house the Insta360 One RS alongside the rest of my smaller Gridfinityable camera gear. The main case houses the camera body with the 4k boost lens with or without the mounting bracket. The 360 Lens…
A test mount model for insta360 ace pro. I don't have this camera on my hands, the dimensions are taken from questionable sources. Cavities in the back wall imply the installation of plates made of rigid material. Print Settings Printer…
Lens Cap for the Insta360 GO 3S I printed with a 0.1mm layer height, but it should also work with a 0.2mm layer height. No supports are needed.
Details This print consists of 3 parts: A left bracket to mount the Pioneer SPH-DA360DAB to the Toyota GT86 Subaru BRZ A right bracket to mount the Pioneer SPH-DA360DAB to the Toyota GT86 Subaru BRZ A Fascia to fill left, right, bottom…
Update: Version 2 available here https://www.printables.com/model/369633-mounting-bracket-for-dji-mic-with-insta360-x3-vers -------------------------------------------------------- Bracket for mounting DJI Mic receiver with Insta360 X3.…
INSTA360 one r vertical case with gopro screw mount. Intended for mounting 360 mod on: invisible stick on helmet on handlebars Vertical position sometimes is more favorable - lens is a bit higher up. This design inspired from thingiverse…
This is a remix of the famous "rugged box" model, adapted to safely transport the Insta360 Ace Pro 2 with its basic accessories and a micro sd adapter. I hope it can be useful. You will need 6 M3x30mm screws to assemble it. I also created…
Remixed case for the Insta360 Go3s, made room for the larger camera lens of the 3s. This prevents accidental recordings.
Holder for the Insta360 X5 lens guards. Printed in PETG (PLA should also do fine), standard 0.2 layer height. The two lids should be placed top down - and they may be identical - don't know - I just modelled them in place - so I printed…
I printed this from Flex - haven't tried in anything else. Happy to develop further if any interest - just let me know in the comments.
Use 1/4 UNC thumbscrews.
Custom inlay for insta360 X3 For this case (see link) http://www.amazon.nl/dp/B0BL275LHW?psc=1&ref=ppx_yo2ov_dt_b_product_details Holds aftermarket battery charger , Usb C cable X3 with lenscover 2 batteries and 3 micro sd cards. V2 holds…
A TPU case to prevent dings and scratches while the camera is in your bag, and prevent it from turning on by having any of the various buttons pressed. The button to release the camera from the holder is pressable through the case, with a…
Remix of a great design from Josef to fit a camera with mount directly onto the model.
This is a lens cover for the Insta360 Ace Pro. The lens on the Ace Pro is not replaceable should it become damaged, so I designed this cover to protect mine. It simple snaps onto the lens body on the camera. The inside edge is slightly…
Samsung Galaxy A36 Case - Solid I like the slits. But it causes dust to get stuck. So I made two versions: One where the entire thing's filled up, and the other where the slits remain, but the side that's facing the back of the phone has…
Just a quick scan of the Insta360 X5 camera.
With this vertical case you can operate your Insta360 One R directly with a powerbank. You can leave out the battery. This enables an even slimmer shape. As in the original design you can use a piece of filament as an axis pin. Just cut a…
This is a pressure fit, so you might want to tune the model (changing the scale in the slicer) to match your printer's tolerances. Printed with PETG-CF, 0.4 nozzle, 0.2mm layers.
This is Dummy Battery and Battery Cover for the insta360 X5 Camera which matches the Style, the Size and the Clip-Function of the original Battery. It protects your Camera when no Battery is installed. I made a Sister-Model which is…
Einfacher Clip, um den Insta360 Power Selfiestick (oder jeden anderen Selfie Stick mit 24mm Durchmesser) am Rucksack zu befestigen. Simple clip to attach the Insta360 Power Selfiestick (or any other selfie stick with a 24mm diameter) to a…
a 3d model for mesuring or making custom mounts.
I bought the new Insta360 Ace Pro 2 and I noticed that you can't turn it on or start recording if you're wearing snow gloves, so I thought I'd design this simple trigger that allows you to use it comfortably without taking off your…
Since the new Xplorer Grip Kit has just come out, I thought I'd make a simpler (and cheaper...) model. It can be inserted into the side "hot shoe" of the original Ace Pro 2 cover. You can decide to print it in any material (but if you…
First and foremost thanks a lot PDub for sharing awesome model for Insta360 Go Ultra. Since PDub made the mount to use it as a dashboard cam, I needed to add small features to hold more securely because I'm planning to mount to my helmet.…
Holster für die Insta360 X4 und X5 zum Transport mit einem Kameraclip am Rücksack, oder sonstigem, welches mit einer ¼" Kameraschraube fixiert werden kann.
This is a Insta360 One X2 Stand/Holder I remixed from Lambert's model. I made the hole in the center bigger so now you can turn the camera upside-down to protect the camera if it falls over while it's in the holder. I also shortened the…
its a case for the insta360 x3 camera. holds the camera in its sheath for protection. optionally you can print an insert to put the camera in without the sheath, just print two of them in tpu preferably and insert them into the case. it…
This STL file is for a lightweight and durable FPV mount designed specifically for the Insta360 Go 3S. Perfect for freestyle drone pilots, it securely attaches to your drone using two screw holes, ensuring stable footage during high-speed…
Mount to install a Insta 360 GO2 cam on top of BetaFPV's Cetus X FPV quad drone. To be print in TPU. Keep back in place using an elastic tie.
This is my 3rd project of GoPro case insert. The first one can be found here: https://www.printables.com/model/602754-organizer-insert-for-gopro-case-and-charging-insid The second one can be found here:…
Belt for carry Insta360 with DJI Mic Mini attatch to USB Port. It accept stick or without stick. Belt loop with gap, so you can take it out without needed to take belt out. Wall loops: 4 Infill: 25-30% Print on the side with normal…
insta360 camera holder integrated with waydoo remote control Model printed from PETG. Fits original Invisible Selfie Stick Insta360. Connect the holder to the remote control using a cable tie, and attach the selfie stick to the bottom of…
This is my second project of GoPro case insert. The first one can be found here: https://www.printables.com/model/602754-organizer-insert-for-gopro-case-and-charging-insid I design this new one so I can keep my new insta360 X4 and its…
This is a remix of the original inserts Marcus Perhamn created for the Parametric Rugged Box by Whity. What this insert is designed for: Insta360 x4 with the standard lens guards and thermo grip cover installed 2 battery slots This…
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
Mount for the Insta360 Go Ultra Camera Pod. Attributes: Securely holds camera pod to be mounted to GoPro style mounts Side opening allows for Large USB-C cable to be inserted Side opening allows for camera release button to be pushed Side…
Made to support the slefie stick with additonial gopro mounting Category: Camera
Protection mfor cam Insta360 Ace / AcePro, with 4 magnet 8x3
As the lens of the Insta360 One RS is bevelled on one side, there are no suitable ND filters. With this adapter you can use the ND filters from the ONE R, such as the ND filter set from Freewell.…
I've created part that is both a lens cover and a stand for the Insta360 X5/X4 action cameras. This is meant to be printed only with flexible filament (TPU).
![[Version 2] Mounting bracket for DJI Mic /w Insta360 X3](https://media.printables.com/media/prints/369633/images/3114791_5de610de-304e-4a73-bb0a-c5a2e7de7602/x3-dji-mic-mount-v16-01.jpg)
![[Version 3] Mounting bracket for DJI Mic /w Insta360 X3](https://media.printables.com/media/prints/391218/images/3270683_c73cef19-053a-4cc6-9bd2-36e0c3f5f4e2/x3-dji-mic-mount-with-quick-release-v4.png)
![[Version 3.1] Mounting bracket for DJI Mic /w Insta360 X3](https://media.printables.com/media/prints/404600/images/3368585_39f85366-dac4-4876-ba06-48fde99948c4/screenshot_20230221_125848.png)
![[Version 1] Mounting bracket for DJI Mic /w Insta360 X3](https://media.printables.com/media/prints/363542/images/3074354_db0dcf28-4179-4a87-9bbe-bc94764b5362/x3-dji-mic-mount-v9-01.png)
