1 / 3
Kessil A360X Aquarium Light Shade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Light shade for the Kessil A360X lights if you have your lights above eye level and don't want the light in your eyes.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 299
- Makes
- 1
- Views
- 1,028
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My aquarium lights sit above eye level and were annoying so I made a shade that attaches with magnets. My first version was printed in PETG and warped a little with the heat, so I added some ventilation and printed these in ABS with no warping so far.
Print Settings:
No supports
Recommend ABS
Min infill required
Assembly:
Uses standard 8mm x 3mm magnets super glued. It's meant to be a tight fit as well, so I would put some glue in and then press the magnets in.