Glock 19 9mm Dummy Magazine w/ US Penny Weight Cavity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glock 19 magazine remix with internal penny cavities for inert weight — 10 US Penny total capacity
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
What I changed
This remix uses SamK3D’s G19 magazine model as the base. I added two internal cavities sized for small inert weights (I used U.S. pennies) so the printed piece better approximates the empty-magazine weight and balance when used strictly as an inert replacement/training prop. The exterior profile remains visually consistent with the original; the cavities are internal only. No changes were made that would enable the model to feed, chamber, or otherwise function with live ammunition.
Intended use & safety
This model is intended strictly as a non-functional training prop or inert replacement — for handling practice, dry drills, demonstrations, or display. The goal of this remix is to provide a bright, clearly non-operable substitute so users have a safer visual/weight alternative to using a real magazine during dry training. Do not attempt to use this with live ammunition or to retrofit it into a working magazine. Follow all local laws and safety guidance.
Printing reference (for appearance & scale only)
For reference only (no tuning instructions): I printed my remix on an Elegoo Centauri Carbon using OrcaSlicer with the following observed settings — PLA filament, 0.20 mm layer height, 0.4 mm nozzle, “Strength” profile, sparse (20%) infill using a gyroid pattern. The finished print weighed about the same as a standard empty 15-round G19 magazine in my test, providing the desired balance for inert training props. Your printer, nozzle, filament, and slicer settings will change result and scale; adapt as needed for your equipment.
Screenshots & photos included
I’m attaching:
photos of the printed remix with pennies inserted (bed photos), and
a slicer preview screenshot (visual reference to cavity location).
These images are provided for visual reference only. If you plan to adapt this remix on a different printer/nozzle/layer height, you will need to determine your own pause/inspection point or method — I’m not providing step-by-step pause instructions here.
Files included in this remix post
G19_Dummy_Mag_15rd_10Penny.stl (remix)
G19_Dummy_Mag_15rd_10Penny.3mf (slicer project file)
One bed photo showing pennies in place
One slicer preview screenshot (visual reference)
Acknowledgement
Thanks again to SamK3D for the original design and for permitting derivatives. Please see the original page for the base files and version notes.
Safety reminder
This is an inert prop only. Do not modify or attempt to use this model as a working magazine or in any way with live ammunition. Check local laws before printing or using firearm-related props.
