Rain Gutter Camera Mount, Ring Camera Mount, Weather Station Mount Etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was hoping to find a way to place a camera up high under roof corners attached to rain gutter downspouts sized 2x3 in
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 9
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I created a Ring Pan Tilt camera mount or any other camera or gadget to place a camera up high under roof corners attached to rain gutter downspouts sized 2x3 in or about 60 x 80 mm. The first version pictured has 2 screws for the cover but I will also attach 4 screw files to keep corners from curling up in heat if made with PLA and to make more solid. The single hole cover will mount the factory pan tilt base and all holes are sized for the common #6 course drywall screws. I used the 1" 5/8 to attach cover to base and 1" to attach the pictured Amazon mount I found for additional adjustment. I would print with at least 15% infill and 3 perimeters minimum. No supports required