Rocket model altimeter and rescue beeper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is altimeter and rescue beeper for small rocket models. I made: electronic diagram, PCB design, software, case.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
User interface of the altimeter is implemented in HTML and accessed through the device’s Wi-Fi captive portal.
After turning it on, the LED lights up for ten seconds while the altimeter captures the base altitude. Then, place the altimeter into the rocket.
When the rocket launches, the altimeter detects the change in altitude and starts the measurement.
Once the rocket reaches its apogee, the altimeter stops measuring and the recovery beeper starts beeping.
After you recover or find your rocket, turn the altimeter off.
Later, you can download the flight data via the web page provided by the altimeter.
For more details, see the attached files.
Dont forget to make 2-4 small holes (1-2mm) in to body of rocket model :-) This is barometric altimeter.