1 / 4
T-25 #8 Screw Cover - Print in Place - GripRite Construction Screws — image 1
1 / 4

T-25 #8 Screw Cover - Print in Place - GripRite Construction Screws

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Screw Covers for T-25 #8 Screws - Min Infill tested at 15%

Rating
5 / 5
Likes
5
Downloads
22
Makes
1
Views
90
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

Why this exists:

In working on a home project while building a wall, I had plans to use screw caps on a Tech Wall, but turns out I couldnt make these flush without issues.

Couldn't find anything else on here, so pulled out the ole' caliper and got to testing.

Print Details:

  • Min Infill - 15%
  • No Supports - Print in Place

Testing Phases:

All design for this was created within TinkerCAD with T-25 Measurements using:

  • Gear - InnerDia  @ 4 - OuterRad @ 2.5 - Teeth Height @  2
  • Base Cylinder - 12mm Dia
  • Base Square Clear /w 45° angle for Easier Removal

Measurements for this gear object were tweaked several times, with diameter for the full plug to cover the screw and partial border without over-bleeding.

Fitment was verified with GripRites' T25 #8 Construction Screws, with a firm hold, with removal easy if intentional and no breakage was experienced. Tighter holds were taken into account with cutting parts of the base cylinder via angled slots, to allow a flat head or similar.

Tags