Qube 540 French Cleat Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Need more desk space? Have a Qube 540? This adapter lets you mount the case to the wall using the French cleat system!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I am always looking for ways to make use of wall space to keep clutter and objects off my desk, PC included! This is an adapter designed to use existing holes on the back and top of the Qube 540 case to use a French cleat mount on the wall.
The design incorporates machine screws on both the top and back of the case with the mount wrapping around the edge to prevent accidental opening/removal of the rear panel while the PC is mounted.
The only hardware required is M3x10 bolts, M3 washers and nuts (x4); replacing the factory handles to keep a sleek look on top. You can use your existing wall mount or print and install a 5" cleat section to the wall; mounting into a wall stud is required to support the weight of a fully built computer.
I have included a sliced PETG file fit to the MK3S+ bed, the total length is 320mm but fits using supports and a diagonal print (also contributes to better tensional strength against the cleat). I don't believe it is required, but as an added safety, it currently is set to use 100% infill, still only using 99g of filament!
There is also an included split model that can be printed as 2 pieces and slotted together during assembly; allows for the use of smaller printers or for those who don't want to use a diagonal print method (and avoid the supports required).
The standard hole adapter provided by CoolerMaster can be used along the bottom of the print to space the back out from the wall and allow the back panel to sit parallel to the wall.
Feel free to reach out if you have any questions!