1 / 1
Wheel hub - 12mm hex to 5mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wheel hub that mounts a standard 12mm hex RC wheel to a 5mm shaft on a NEMA17 stepper motor. After printing, I use a…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 158
- Makes
- 0
- Views
- 706
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Wheel hub that mounts a standard 12mm hex RC wheel to a 5mm shaft on a NEMA17 stepper motor. After printing, I use a 6-32 tap to thread the hole for the wheel, and a hole for the set screw. I use inexpensive 6-32 machine screws from my local hardware store. I could try to engineer the threads into the part, but I've gotten much better results by just adding a small hole into the part where I want the threads and then thread them with a tap.
Category: Robotics