Counting matching models…
35mm hinge drilling jig for various hinge brands e.g. Blum. This is a simple jig for when you need to drill a single hole or just need a simple way of aligning the drill bit. Different spacers can be used for different variants of…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Tool for writing/reading Braille with large 4.5mm diameter dots. https://youtube.com/shorts/FGBh-y-hEB8 https://youtu.be/Z9aghYXRcNk Customization Merged Print pre-built sheets in common sizes. Unmerged Layout custom sized sheets within…
Initially, I drew a durable and convenient glasses case, but it can be used as a container for small items. Internal case dimensions: diameter 33 mm and length 155 mm. First change I added another version of the body half, making it a…
This is a simple Christmas tree ornament. 85mm tall and hangs nicely on the tree. No hooks or string required. Prints easily on the bed due to the octagonal shape. Looks good on the tree and people live it. Settings 2 walls 10% infill I…
Perfect for testing basing techniques before actually using the ones you bought/came with your kits. Go buy Quar!
Clamp on gear for the focus ring of AF Nikkor 85mm f/1.8D prime lens. Gear meshes with 0.8mm module gears. Inspired by the Nikon 50mm (https://www.printables.com/model/227165-nikon-50mm-focus-gear)
Endcap for 25mm rods that extends them by a few centimeter. Has a taper inside so they're a press fit. I printed in PETG with 6 walls
Sony FE 1.8/85mm Gridfinity bin 2x3 grid. Space for filters, and larger aftermarket lens caps. Make sure to grab the right file, for extra space for filters, if desired.
These are some test prints I made to help level my bed while it's printing. They are currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D, etc. It helps to see…
Gridfinity holder for 1/8" and 3.175mm endmills. Gridfinity endmill bin 1x2: 20PCs Gridfinity endmill bin 1x1: 11PCs Max endmill lenght: 38mm
Dieses ist eine Sortierbox für Kleinteile. Fachgröße ca. 25x25mm Höhe ca 25 mm Material: PLA Farbe: nach belieben Schichtdicke 0,2mm gezeichent mit FreeCAD 2026-02-22 Frank WL
A screwdriver holder for HSW with a loop of 15mm
This is my own design of the speed loader for 4.5mm steel balls. This is very good , handy tool without any spring or any movement parts. The full capacity is 967 BBs. What you need is just open it and load few hundreds BBs then close it…
pour vos travaux ! disponible en 60mm: https://www.printables.com/model/1238760-cale-a-poncer-60mm
needed some stands for frames that have been on a wall with cable hanging out on the bottom hole - so i added 10/15mm on bottom. sry for the clunky approach - i just started with 3D. “it kind of works” but is far from perfect
A hook to hang stuff from that slides on to the edge of a 1/2" thick shelf
I made this specific for my cat bed perch. The cutout is made to fit my cat wall half hexagon cat bed. This is the link to the store I ordered my cat wall bed and shelving from https://rshpets.com/en-us . I highly recommend them! I did a…
The approximate height is 13.5 mm. Without holes, like I did for the bathroom to glue
A filter for your sink, that prevents gunk from going down the drain. Fits standard 85mm size holes.
Light Switch Cover 85mm. It's designed to be friction fit onto existing light switches.
Pause button magnet for 5mm cube magnet. As the picture shows, the G-Code has a pause giving you a chance to slide in the magnet. I used a Neodymium supermagnet as obtained from…
This 65 mm adapter allows multiple pens in a CNC machine. Will require: 6 x LM8UU bearing M5 screw and nut 3 x 8 mm rods
Cooling fan mount for a Arrma Raider rc buggy. - 35x35mm fan
Nachdem das Abflussgitter gebrochen war habe ich es etwas dicker nachgezeichnet. Passend für 175mm Abfluss
Designed to help with soldering for the TRRS 3.5mm jack motherboard. Made to help with build a Variable Openmod Part 3. This is a tool to help soldering 3 wires into one for ground. And a tool to help hold wires when soldering into a TRRS…
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Resized and repositioned the hooks from the 45-degree bin from eethansshen Included 2 versions for more options
Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
I raised the height to allow the filament tube to be outside the chain, this allows the tube to be less crunched.
Die Gewehrhalterung dient als Ersatzteil für die Standard-Ablage von Tec-Ro. sie ist dicker und mit einem Zusätzlichen Handtuchhalter ausgestattet. Die Schnellspannschraube und die Gummiplatte vom Originalteil kann 1:1 verwendet werden.…
I liked the look of the StarSaber and didn't want to buy one, So here we go.
Jednoduchý 13 ranný zásobník, 5mm. Vinuté pružiny kuchám z Ali vysačkové cívky https://vi.aliexpress.com/item/1005004427151686.html?spm=a2g0o.order_list.order_list_main.218.149a1802UMX1wu&gatewayAdapt=glo2vnm Magnety 5x4mm…
Lightweight ruler holder that can be screwed into a wall using M3 countersunk screws. Inspired by this Model by HolzerMax and adjusted to my smaller ruler.
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
Needed a foot to raise my aluminum extrusion off of the floor so I designed and printed a small foot. Connect to aluminum extrusion using a single M5 bolt screwed into a t-nut. My print parameters: Printed in PETG 0.2mm layer height 15%…
Pipe Clamps – Easy, Reliable, and Versatile! Designed for3D printers, these clamps are perfect for securing pipes with ease. Key Features: Single Clamps : Fit pipes from 10 to 75 mm. Double: Fit pipes from 15 to 40 mm. Triple Clamps : Fit…
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
To making the handling for our fairy lights a little bit easier, i made this clip. The clip is for perforated plates with 15x15mm holes.
This model was created to hold nine 10ml Schott vials with 22.75mm diameter. Use stick on rubber feet to keep it from sliding around, works great on shaker table.
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
MARKAL PAINT MARKER MAGNETIC HOLDER 5X ~14.5MM DIA MARKERS. PRINT BASE AND 2 TABS. INSERT 2X 3/8" DIAMTER X 1/4" MAGS THEN PRESS IN THE TABS. SHOULD WORK WITH OTHER SIMILAR SIZED MARKERS. LINK TO MARKER…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
Small box of 50 pieces of air gun pellets with cover. The perfect box for match pellets. Printing without support. You should turn the model flat side up.
Juego de anillas y soportes para instalar en objetivo Samyang. Este setup permite instalar enfocador EAF ZWO, soporte para tubo guia, asa superior y soporte para ASIAIR. Se recomienda imprimir en ASA y los detalles en blanco. Para este…
Next to my bed I dont have space for a nightstand so I designed this glassholder for urgent water needs in the night. :D It is meant for rather big glasses (e.g. 0,5l beer glass). It is mounted with 3 screws which are hidden on the bottom…
Ich suchte eine passende Rohrschelle um meinen Küchenabfluss zu fixieren. Dieser war nur am Spülenabfluss und am Wandflansch gesichert. Durch das Abpumpen des Geschirrspülers hat sich das Abflussrohr über die Zeit gelöst. Dies kann…
To successfully craft this item, get the spring from the pen, on both sides, install the screw from the bottom, print 5 parts for the left side 2x stick 2Xroast 1xleft side/+2 cut springs, glue the springs to the underside of the roast.…
A three bay, seven day, slide lid pill organizer with days and times embossed on the lids. The overall box footprint is 202mm x 132mm. Individual storage cells are approximately 25mm x 40mm x 17mm. Slide lids are 2.5mm thick (not…
Schablone zum fräsen von Fingerzinken mit 15mm. Für bretter bis zu einer Stärke von 30mm Wer weiß, wofür man dieses Werkzeug braucht, weiß auch wie man es benutzt, desshalb hier keine Erklärung : ).
Aufputz Gehäuse für 2er Steckdose oder Schalter - auf 0,15mm Nozzle bemaßt SLDPRT Datei anbei.
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Schachtel mit Deckel für 10 Filmdosen für 35mm Film verschiedener Ausführung. Die Abmessungen sind dermaßen gewählt, daß sie mit Velour ausgekleidet werden kann. Unter den Modelldatein ist auch eine Schablone um die Auskleidung im Deckel…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Perfect Holder for a 25mm Clothing Rail I designed a holder specifically for a 25mm clothing rail, and it works perfectly. Here are the details: Design Features The hook is slightly smaller than the rail's diameter, allowing the rail to…
Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
Why When determining the maximum flowrate for a specific hotend/filament combination I always use the poop method , in which blobs of filament are extruded and weighted to assess the capabilities of the setup tested, but this time I…
Ablageschale für Zeiss 85mm f 4 mit Nikon Bajonett. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ……………………. Storage tray for Zeiss 85mm f 4 with Nikon bayonet. The tray is 1 to 2…
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
I made this to adapt an old speaker/mic to my QMX. The spacing between the 3.5mm audio plugs is 12mm. It will only plug in one way because the other way the power cable will block it. The 3.5mm plugs I used have 7.9mm ends which depending…
Streamline your coffee-making routine with our custom 3D-printed holder designed to fit circular espresso filters measuring 64–65 mm in diameter. Crafted with precision and simplicity in mind, this holder keeps your filters neatly…
It's a 3d model of the creator of good mass produced hobbyist 3d printer company. I created this using tinkercad (because onshape can't edit stls very well and web sketchup is very laggy on stls). Might need some manual support. I hope…
Tight wall-mount for various 75mm piping, for example: - plastic drain piping - heat recovery ventilation flexible piping First insert the M3 nuts into the base (use a pliers to snap in), and attach the base to the wall with two wall…
pour vos travaux ! disponible en 60mm: https://www.printables.com/model/1238760-cale-a-poncer-60mm
Once I've lost one of my rod joints during kite play in field, I needed to design and print new ones on my own. Photo shows original and printed joint. Step and FreeCad source files for are attached. Feel free to modify it for your use.
Colored layer is slightly elevated so people with less advanced printers can print it in two colors just by pausing and changing filament when it starts to print! 4,5mm hole
A model of a micro four thirds lens for anyone who wants to see how the lens looks like. You can 3D print it to see the size in real life.
Werkzeug, um den Bremsschlauch einer Hydraulikbremse zu halten, um den Pin einzuschlagen. --- Tool to hold the hose of a hydraulic break to insert the end pin.
— English Version below — Titel: Depeche Mode Perle – Ein Tribut an die Filmmusik meines Lebens Beschreibung: Diese 3D-gedruckte Perle ist eine Hommage an Depeche Mode, die Band, die den Soundtrack meines Lebens geliefert hat. Jede Perle…
Just a spacer I made to get a little more height out of each 6mm standoff when doing a custom cooler for a Pi 5.
End cap to fit over a 25mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
A simple wheel hub for 2.5mm D shaft motors. I'd recommend a drop of superglue to hold them on the shaft
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
Inspired by AvE's design. This is a completely remodeled version and is not a derivative or a modified version of the original. There are two versions depending on how you want the blade to stick out of the top. You will need one M3 heat…
🔁 A Bigger Bite, Same Clean Cut This remix of the original Chompie and Nosh takes your can-cutting to the next level! Now with 5mm guide slots , Mega Chompie (top) and Mega Nosh (bottom) allow for precise and repeatable cuts at the height…
Diese Lichtfalle wurde speziell für die Zuluftöffnung von Growzelten entwickelt. Sie verhindert zuverlässig das Eindringen von Licht, ohne die Luftzirkulation stark zu beeinträchtigen. Der Anschlussdurchmesser beträgt 145 mm , ergänzt…
English: This is a custom inlay designed for the card game “ Fantastische Reiche ” (also known as Fantasy Realms ). The inlay works best with sleeved cards , but it also fits unsleeved cards. Inlay dimensions: Width: 113.35 mm Length:…
Get full information about handling and how to print the bracket on my blog: https://nerd-corner.com/click-and-clamp-system-smd5050-bracket//
Keep your cables neat and secure with these snap-fit cable organizers designed specifically for 15mm aluminum extrusions . Ideal for 3D printer frames, CNC machines, or DIY rigs using small-format aluminum profiles. These clips help route…
This is a remix of the MacBook vertical stand model. In this version, the gap between the mountains measures 15 mm.
a remix of alphaflight83, with chanfer sides, copying 28mm bases :D enjoy Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.16 Infill: 25% **Filament:** Polymaker Polyflex TPU Black…
We are excited to announce our first collaboration with Out of Dart! The 3D printed STL files for Fenrir 717 and Greedy Wolf 727 are now available at a 30% discount starting today This special offer runs until March 31st. Features: 1.…
Refer to the original post for further model details.
This simple spacer is designed for rabbit hutches to slightly raise the horizontal bar behind the door – the one that keeps hay from falling out. By lifting the bar a few millimeters, this spacer helps prevent rabbit urine from pooling…
Counting Trays 100 pcs. - 2mm 2.5mm 3mm 4mm 5mm 6mm 7mm 8mm
