1 / 4
Skadis T-Nut Stalco AU915A charger mount — image 1
1 / 4

Skadis T-Nut Stalco AU915A charger mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Skadis T-Nut mount for Stalco charger AU915A

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Made from scratch, but inspired by this Makita charger mount. For mounting to Skadis board the M2.5 T-Nuts are needed and at least M2.5x12 counterbore screws. If you need different screws you can tweak the screw_* parameters in f3d file.

For ease of printing and clearance adaptation the mount uses 4 pegs printed separately. The pegs are very tight I used 0.2mm clearance for them, if yours doesn't fit you can change the peg_clearance for wider peg diameter and peg_smaller_diameter parameters in f3d file or adapt X-Y compensation (orca slicer) in your slicer.

Print settings

Printed the mount in PETG with the following print settings:

  • 0.6 nozzle, 0.3 layer height
  • 2 outer walls, 3 top/bottom shell layers
  • 20% gyroid infill
  • mount print orientation: laying on the front (the side without T-Nut guides) (use auto-orient)
  • pegs print orientation: vertical, laying on the bigger diameter part  (use auto-orient)
  • no supports

 

Tags