Spinny McSpoolface - Sapmaker U1 and Bambu AMS lite style spool holders for voron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spring loaded spool holders that spin on on bearings
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 21
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
it started as a fun CAD project, but ended up as a great filament spool holder for my DIY Tool changer. I tested with Bambu, Polymaker, Esun, Eryone spools and they all fit. It can be mounted to a 2020 extrusion frame or free stand on the base.
To make these you will need the following hardware.
8mm rod 120mm long.
4 x m5 countersunk bolts 30mm long
4 x m5 nuts
2 x 608ZZ bearings
2 x 8mm shaft lock collar
6 x Compression Springs (0.8x10mm OD,15mm Free Length)
3 x M3 (I will add the length when I can) bolts to fix the arms to the spinner part. Do not over tighten.
1 x PC4-M10 Male Straight Pneumatic Fitting Connectors for the filament PTFE guide
M5 x 35mm bolts and nuts if you want to use the base.