Hex Key
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact hex driver with magnet to hold hex bit
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 123
- Makes
- 2
- Views
- 807
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Hex Key
Compact hex driver with magnet to hold hex bit.
Nearly the same as the original but a bit smoother with a space to insert a 6 x 2 mm magnet (easily sourced on Amazon or Ebay).
If you print this version without the magnet the hex bit will be loose (use the previous version for a push fit).
Use the gcode to print directly - otherwise set up your slicer to pause at layer 48 (if using the settings below) and drop in the 6 x 2 mm magnet. Resume print.
SETTINGS:
Orientation already aligned in the files with the open hex face upward
Layer height: 0.2 mm
Infill: 10%
Brim: 4 mm
Supports: None
Material: PLA, PTEG, etc
Regards, Paul