Spice rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very nice looking spice rack made with some wood and two printed parts
- Rating
- 4.8 / 5
- Likes
- 121
- Downloads
- 368
- Makes
- 5
- Views
- 5,477
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v2.0
This is a very simple spice rack that looks really nice. These are the necessary parts:
- Two printed sides
- Two ~32cm long 10mm diameter wooden dowels
- One ~32cm long 40x10mm piece of wood (the model was updated to have exactly 40x10mm slits)
- Wood glue to put it together (or any other suitable glue)
- Small 1.5mm diameter screw
The diameter of the wooden dowel and the dimensions of the wood piece don't need to be perfect since the wood glue will make up for undersized parts and some sanding will make up for oversized parts.
The length of the wood pieces can be whatever you want since the design doesn't constrain that. Just don't make it excessively long.
The length of the mounting screws depends on where you mount this but note that 8mm of the screw length is going to be buried in the printed part.