yoRadio case for 3.5" IPS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
yoRadio case for 3.5" IPS screen and one encoder with 40mm knob
- Rating
- 5 / 5
- Likes
- 131
- Downloads
- 1,483
- Makes
- 3
- Views
- 8,319
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
About this design:
I was looking for an enclosure that would visually match my Bluesound Powernode, but couldn't find one that fit my needs, so I designed my own.
Updates:
2026-06-02: Added an optional bottom part designed for the VTom Radio PCB,
2026-06-02: Improved the main case - now easier to print and mount with bottom part,
2026-05-19: Added an extra knob option (40mm):
What you'll need:
Hardware:
90x64mm smoked acrylic sheet (3mm thick),
standard rotary encoder,
40mm diameter knob (3D printed or commercially available metal knob),
C14 power inlet with fuse holder (27x31mm) (or other - use the blank version of bottom enclosure),
anti-slip foam pads,
M3 self-tapping screws,
M3 screws with nuts,
nylon standoffs for PCBs.
Electronics (optional):
custom PCB (power supply + ESP32).
PCM5102A DAC module,
ST7796 IPS display,
WiFi antenna.
Assembly:
1. Top enclosure:
install the smoked acrylic panel (90x64mm, 3mm) - I've used T7000 glue,
mount the rotary encoder,
carefully mount the screen with M3 self-tapping screws,
attach the 40mm knob.
2. Bottom enclosure:
install your PCB using the mounting holes and nylon standoffs,
install the DAC using holder,
install the C14 power inlet,
install the WiFi antenna.
3. Final assembly:
secure top and bottom halves with M3 screws,
insert anti-slip foam pads into each foot.
Printing tip: printed with fuzzy skin and Hilbert curve on the top.