Rain World - Slugcat with filament spear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modeled my own take on a slugcat. Watch out, this one might stick you with their adorable little filament spear.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
This model does require supports for the arms and parts of the tail. I recommend a brim to make sure the thinner parts of the legs don't go running away during the print!
This little cutie has a hole in their right hand to hold a ‘spear’ of 1.75mm filament. Try letting your extruder gears chew on the filament a little bit for a nice rebar texture, or to be truly prepared for hungry lizards, glue a spare rock/nut/whatever into their open left palm.
Depending on your printer and/or slight variations in filaments, the spear might be a very tight fit. If you're unsure, you may want to scale up the model by 5-10%, or be ready to do a little bit of shaving with a knife to widen the hole.