Rain World - Slugcat with filament spear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled my own take on a slugcat. Watch out, this one might stick you with their adorable little filament spear.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This model does require supports for the arms and parts of the tail. I recommend a brim to make sure the thinner parts of the legs don't go running away during the print!
This little cutie has a hole in their right hand to hold a ‘spear’ of 1.75mm filament. Try letting your extruder gears chew on the filament a little bit for a nice rebar texture, or to be truly prepared for hungry lizards, glue a spare rock/nut/whatever into their open left palm.
Depending on your printer and/or slight variations in filaments, the spear might be a very tight fit. If you're unsure, you may want to scale up the model by 5-10%, or be ready to do a little bit of shaving with a knife to widen the hole.