1 / 1
Werkmeister Spring Pin Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement pin designed for the springs of the Reguflex Quattro Tellerrost by Werkmeister.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Public Domain
Sometimes the pins holding the springs together break due to wear and age. This model is designed to be an easily printable replacement.
You will need to supply your own M2 x 12mm-ish long screw for each pin! ±2mm length should be fine.
The original screw cannot be reused, due to its size and therefore risk of layer delamination.
Print on the flat side, use enough perimeters so that the pin is solid. The handle can be left hollow, it is just designed for ease of holding during installation.