The Hand Cannon: Steel-Reinforced VR Pistol Frame (Pico 4) (826g)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A complete, multi-part Pico 4 controller clamshell frame
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 97
- Makes
- 0
- Views
- 853
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stop playing with plastic toys. The Hand Cannon is a heavy-duty, solid-state pistol frame designed specifically for the Pico 4 controller. This project started as an R&D prototype for active haptics, but we discovered that the frame itself—when printed solid and reinforced with steel—was the real game-changer.
This is not a hollow shell. It is a dense training instrument. The geometry is designed to fully encase the controller, providing a realistic grip angle and significant forward inertia to stabilize your aim in games like Pistol Whip.
Why print this?
Steel Spine Architecture: The upper receiver is reinforced by two 10mm x 100mm stainless steel rods. These act as a structural backbone, preventing flex and adding "Bull Barrel" weight for steady aiming.
Zero Wobble: Uses a reinforced "Clamshell" design that locks the Pico 4 handle in place. It feels like one solid unit.
Solid Grip Density: The handle is designed to be printed with high infill, acting as a dense anchor in your hand to counter-balance the steel barrel.
Industrial Styling: Features a full-length, heavy-profile Picatinny-style rail system for an aggressive, tactical silhouette.
Print Instructions (Critical for Feel):
Material: PETG-CF or PLA-CF (Carbon Fiber blends recommended for texture).
Walls: 5 to 6 Perimeters (Do not skimp here; mass is the feature).
Infill: 25% Gyroid minimum.
Supports: Required for the internal controller cavity.
Hardware Bill of Materials (BOM):
The Spine:
2x Stainless Steel Rods (10mm Diameter, 100mm Length).
Assembly Fasteners:
4x M8 x 73mm
2x M4 x 35mm
2x M4 x 25mm
1x M3 x 32mm
License: CC BY-NC-SA (Non-Commercial).