Tairn and Andarna Fourth Wing Dragon Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dragon-and-fire shaped bookmark depicting the dragons Tairn and Andarna
- Rating
- 5 / 5
- Likes
- 210
- Downloads
- 1,881
- Makes
- 6
- Views
- 4,743
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are three variants of this bookmark; one .3mf file for printing with an AMS/Multimaterial system, one with Andarna raised up, allowing for a color-swap, and one with Andarna cut-out for a single-color only print.
Tairn's tail can be lifted or pressed in, allowing it to be placed over a page and clipping the bookmark to the page.
You may wish to scale up the X and Y axes to get more detail (the larger bookmark in the pictures is scaled to 166% in both X and Y axes), but the native 100% size is good for a bookmark.
I also recommend printing the AMS version with the second color face-down.
Please consider supporting me to further my 3D printing goals.
https://ko-fi.com/davidmcfarland23516
Print Instructions:
For all, use Arachne/Detect-Thin-Wall settings.
For the Color Swap file: If printing at 0.2mm layer height, insert a pause at layer 7 to swap colors.
For the AMS file, do NOT select “scale to millimeters” if prompted. It's seeing Andarna's feathers as being very small- they are.
Print very slowly if you have bed-adhesion issues.
