1 / 4
Miniature Top Hat for Labubu - Snap-Fit Assembly, No Supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Authentic top hat design for Labubu figures. Snap-fit assembly, no supports needed. Prints in under 2 hours. Easy setup.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 136
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick Facts
- Design: Authentic miniature top hat with snap-fit attachment—no glue or tools required.
- Assembly: Zero-support print with integrated snap mechanism for easy installation on Labubu monsters.
- Speed: Two components print in approximately 2 hours total (top: 51 minutes, brim: 1h 10 minutes).
Print Settings (Tested on Ender-3 V2)
| Setting | Value |
|---|---|
| Total Filament | 5.01 m (top + brim combined) |
| Total Weight | 6.26 g |
| Total Print Time | 2h 0m 23s |
| Material | PLA |
| Supports | None required |
| Layer Height | 0.20 mm (standard) |
| Nozzle/Bed Temp | 218°C / 70°C |
Component Breakdown
- Top Hat Top — Main crown structure (2.27 m filament, 50m 52s print time)
- Brim — Brim ring for improved bed adhesion and authentic hat shape (2.74 m filament, 1h 9m 31s print time)
Printing Notes
- Use brim on the… brim for optimal bed adhesion
- Ensure clean first layer for snap-fit mechanism to function reliably.
- Optimized for Ender-3 V2 with BLTouch bed leveling.
- Post-print: Light sanding of snap edges improves fit if needed.
Community Note: If you print one, share your Labubu styling! Let me know how the snap fit works and if you have suggestions for future accessory designs.