1 / 8
Zoom F6 Secure Mount for Orca OR-268 Bag (Two-Part Top/Bottom Holder) — image 1
1 / 8

Zoom F6 Secure Mount for Orca OR-268 Bag (Two-Part Top/Bottom Holder)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Secure two-part mount for the Zoom F6 to fit firmly in the Orca OR-268 bag, prints support-free and installs easily.

Rating
0 / 5
Likes
1
Downloads
38
Makes
0
Views
187
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This is a custom-designed two-part (top and bottom) mounting bracket that allows the Zoom F6 audio recorder to sit securely and solidly inside the Orca OR-268 bag.
Although the OR-268 is marketed as compatible with the Zoom F6, the stock bag provides no reliable mounting solution—the recorder tends to float, shift, or sit loosely. This mount fixes that.

✔ What It Does

Holds the Zoom F6 firmly in place inside the OR-268 bag

Prevents wobble, shifting, or strain on cables

Uses existing screws already on the Zoom F6—no modifications needed

Requires only one additional 1/4" plate screw to secure the mount to the recorder

Provides easy access to the headphone volume control while installed

Once installed, the recorder is extremely solid and won’t move during transport or use

Do not fasten the side velcro straps to the top mount; it isn’t designed to support them.

✔ Design Features

Two-part system: Top Mount + Bottom Mount

Built-in print-friendly support bridges (only inside the screw holes)

No external supports required

Contoured for a tight, stable fit inside the OR-268

Designed for reliable long-term, on-location field use

✔ Recommended Print Settings

Material: PETG OR ABS/ASA (recommended for strength and temperature resistance)

Layer Height: 0.2 mm

Walls/Perimeters: 6

Infill: 15% gyroid

Supports: None needed — just remove the two small built-in supports inside the screw holes of the bottom mount after printing

✔ Assembly

Print both parts (top and bottom mounts).

Remove the two small built-in supports inside the screw holes of the bottom mount.

Attach the top mount to the Zoom F6 using the existing screws already in the recorder.

Add one 1/4" plate screw to secure the top mount fully.

Remove the screws holding the lower rods on the Orca OR-268 (you’ll need two screwdrivers).

Slide the bottom mount onto the blue rods until it seats properly.

Re-install and tighten the rod screws to lock the bottom mount in place.

Remove the large side screws on the lower sides of the recorder.

Insert the recorder into the Orca OR-268 bag, making sure it slides fully down into position.

Re-install the side screws to secure everything firmly inside the bag.

Tags