Counting matching models…
I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 This ocarina is designed to be easy printed and to be small enough to fit on my VORON0. It is supposed to be printed at the mouthpiece without the need of…
More info here for kits and BNF Print the cam holders in TPU, 0.3mm height, 0.48mm width. F75 Pro Max Ducts: Experimental, print at your own risk 😛 Print in PETG, PA or HIPS; any high impact plastic should do. Then insert the struts into…
Update 3/5/23: I have added a wider bulb holder for the IOM/US1M style boats. I also added Star 45 boat arms, bulb holder, plates, and clamps. Update 2/4/22: I added a longer pipe catch piece to allow the stand to go into “narrow” mode.…
This is the 7th iteration of my dosing cup holder for the DF64. It brings the dosing cup closer to the chute and there is no need for the silicone shoes anymore. You just put the dosing cup onto the holder and it stays there perfectly fine.
A pulley hub for F695-2RS bearings. The overall width is 9 mm. May need tiny amount of support on the bottom surface, but might not be necessary. Can print in whatever material you want, this part shouldn't be near any of the heat of a…
This slow bean feeder provides consistent, controlled feeding of coffee beans into DF64 or DF64V grinders. Features: Variable Speed via potentiometer USB Powered (5V) with optional LiPo battery support Direction Reverse with push button…
I redesigned some parts to make it look like the MF65. List of materials and parts on my BOM spreadsheet . Assembly instructions Assembly is basically the same as MK2.4, so you can check assembly videos here . Main difference is hood and…
This grind size indicator includes a vernier scale that allows for precise sub-tick adjustment on a stock DF64. Each gap in the vernier represents 1/10th of a stock tick mark. Easily and repeatably adjust down to the 1 micron resolution!…
Prevents coffee grounds from flying everywhere when grinding my coffee beans.
Sometimes the feeder disk can jam, and sometimes it struggles to pick up the last bean. I've included the STEP files in case people want to make their own adjustments; please comment if you find a perfect solution! Edit 01/09/25: hopper…
Blind shaker / cup holder for the df64 coffee grinder. Simply attach with the original screw. If you like, you can glue a 10x1 mm round magnet at the bottom. The maximum diameter for the blind shaker is approx. 70 mm.
Wanted something for DF65 small battery opening. This will keep water away on calm days, when absolute storm, cover with tape to maximize waterproofnes. Prnt from some squishy TPU
My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker. Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely…
Mount for holding the weber workshop's blind shaker on the DF64 Category: Kitchen & Dining
Mod of the original slimbox. It's a ergonomic hitbox-style layout low profile fightstick. It's specifically designed for Street Fighter 6, where using parry and drive impact is crucial. Therefore the usual 2 rightmost buttons got…
This is a mount designed to hold a Weber Workshops blind shaker for the DF64 Gen 1 and 2 coffee grinder. It has a slot for a small magnet in the base that centers the shaker directly below the grounds chute. In the photos of mine, I made…
I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…
Do you own amazing gyroscopic DeWALT DCF680G2 and has no place for storage? This hanger holder is perfect for hang screwdriver and two batteries in bottom of shelf. There is hole for screwdriver and small gap to keep device in even in…
The English Electric Lightning is a British fighter aircraft that served as an interceptor during the 1960s, the 1970s and into the late 1980s. It was capable of a top speed of above Mach 2. The Lightning was designed, developed, and…
Shaker mount for MHW-3Bomber Blind Shaker, fitting the DF64 (Gen 2). Fits the lid as well just under it.
F63 Condor model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing I have added two further varients that have been thickened to try and make it printable in 1000:1 Point…
A 20deg cup holder to reduce ground coffee from flying everywhere.
This remix split the part right in the middle, with 2mm holes to align with a bit of filament while gluing both parts together. With a bit of sanding and spray paint it, you can hardly see where the seams are. Category: Kitchen & Dining
3D printable eyepiece for Nikon cameras replacing the DK-17. I also included a 3D file of just the thread, which you can use as a base for your own custom eyepiece or cover design. Printing recommendations The thread on this part is tiny.…
Designed from scratch, used the original version as an inspiration. This is an improved version with better and tighter tollerance for the bellows and improved angle for less coffee beans retention.
Printed on Anycubic Kobra 2, PLA Tough, 30% infill, no brim, no supports, with logo against plate (upside down). The logo part could perhaps use supports for a nicer finish. But you can print safely without supports. I've also included a…
DF65 Keel locking *Keeps the DF65 in place and transport..! Print 2 pcs.! Also nessesity with this:…
What problem does this solve you asked? Stepper motor shafts/bearings aren't designed to take axial load, but only radial load, so taking the whole weight of the gantry isn't their forte, they will wear down the bearings faster, create…
The DF64 gen 2 wave washer is lose from the midle of the filter section cause the wave washer is too thin. this ring should be added under the wave washer. the modell is 1mm think, you should adjust the thickness by scaling the z based on…
BOM 2 * M3 30mm screws at minimum 8 * F695 flanged bearing 1 * 5mm drill bit that can clear 65mm (40mm extrusion +25mm Jig) Link to onshape document .
This is a ballast bulb holder that will help support your boat on the factory stand. It will prevent the weight of the fin and bulb from damaging the boat hull by hanging in the breeze. It will also help the boat stay on the stand if it…
Holder compatible with a blind shaker up to 74 mm or the original DF64 Metal Coffee Cup. Diameter: Up to 74 mm Attachment: Uses the original screw from the portafilter fork Features: Slot for a 10 x 1 mm magnet at the base Blind Shaker:…
Hold 58mm portafilter on a DF64 Gen 2 grinder, may work on a Gen 1 but not sure. This was designed specifically off of my bottomless Normcore portafilter and Normcore dosing ring, but it may work with other combinations of different brand…
This is a model of the chute and declumper for the DF64P espresso grinder. You habe to “pre Bend” the declumper to have the optimum result like in one of the pictures. I recommend PETG with a layer height of 0.12 and 100% infill. I would…
These are two (chute and hopper) fitted vacuum attachments for DF64 grinders. This was tested on a "Turin Gen 2".
Set of risers to lift the rear of an MSI GF63 style laptop giving an angle of about 7 degrees. This improves cooling and typing angle.
This is really easy way to ventilate your DF65 after sailing. I dont ever open big hatch, so this is my option. I use 5v fans so its easy to feed just with USB powerbank.
Funnel lid for DF64. It replaces the bellows and metal lid to allow for one hand operation and hot start. It includes an anti-popcorn disk to prevent beans from popping back out of the funnel. It needs support material on the outer edge,…
The measurements are the exact ones of the POCO F6 smartphone so it is necessary to increase the dimensions of X and Y in the slicer to compensate for thermal shrinkage. I increased both X and Y by 1% but this depends on the filament used…
Print two each of the included .STL files in the original orientation. Insert into wall at appropriate distance.
Breville 54mm portafilter holder for DF64 / DF64E / DF64P grinder. The height of the portafilter as measured from top of the portafilter ears to the bottom must match up otherwise the portafilter won't sit in place. I've this one…
These are various versions of reverse-engineered fairing inserts for the BMW F 650 CS Scarver motorcycle. There are four variants of the logo area: 1) badge: Houses the original 58 mm BMW emblem (51 14 8 164 924) 2) 56mm: Houses a 56 mm…
GT2-Idler for (623ZZ 3x10x4mm and F623ZZ ) by using this gt2 belt move properly . Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: self made PLA 1.75 White Notes: print speed is 30 and nozzle…
My Voron V2.4 contains two dozen F695 flanged bearings. I found that some failed after less than a year, simply because they had run dry. It seems that many economy bearings come with a very low amount of grease inside and will run dry…
Rotating keychain for owners and fans of the BMW F650GS Dakar motorcycle.
This arm uses two F623 bearings, which are usually used to attach a drag chain to Stealthburner (which you don't need anymore because you are switching to an umbilical set-up). You can use one or two piano wires up to 1mm with this arm.…
May work for other 58mm gear but I haven't tested any
I got tired of dealing with the flimsy designs for the Blind Shaker Mount so I designed my own. Not only is this design stronger and more rigid, it also allows for the shaker to be held in two different ways. 1. With the lid on top held…
F63 Condor model from Elite: Dangerous Model is split into multiple parts based on their colouring Assign the parts to extruders based on your hardware This work is strictly fanart and not meant for commercial distribution. All respected…
For those stormy days when you want to place your boat on the side, not stand upright. Print two, other need to be mirrored. If its too hard to get to stand pipe. Just heat a little. But it must be tight, so it doesnt fall to bottom.,
bottom part REMIXed for Canyon Exceed CF6
I've broken the bottom angle-tab off a few too many times; so I decide a stand would be a good move. The stand sets the charger at an easy to read 15-dgree angle. You'll need 6 x M2 8mm screws to assemble. I'd recommend a brim for the…
I printed with regular PLA / PLA+ and it's working perfectly, no supports or anything, though I would suggest at least 15% infill because the front seemed flimsy when lower. Difference is the small lip in front to prevent the shaker from…
A magnetic dosing funnel for the DF64 grinder. It's a remix from Magnetic Espresso Dosing Funnel 58mm by Demokan adopted to fit DF64 grinder which required much finer outer wall. Two version are available: Compact, similar to original…
A holder for the Dewalt DCF682 gyroscopic screwdriver for use with the GridFinity system. Contains room for 2 batteries, 8 bits, and the electric screwdriver itself. Will fit on a Prusa Mini+. Set infill to at least 15% so that the holes…
The Diatone Roma F5 DJI V2 frame kit comes with an included GPS and Immortal Antenna holder which is very nice quality and does a great job, provided you have the correct GPS (I think a BN220 fits it, can't remember exactly), but if for…
Designed to fit the Turin DF64 Gen 2 coffee grinder, this funnel replaces the bellows while still accommodating the wooden lid. This gives the grinder a cleaner aesthetic, reduces the height, and makes it easier to feed coffee beans.…
Hello, this is a small upgrade that the z-axis is holding in the z-axis guide without Wobbling. its easy to print and you can you how good your printer is calibrated :-D make it first over the Bearing and than in the z-axis guide its…
i got tired of accidentally knocking my DF95 and DF65 boat switch to ON and finding my battery was dead on multiple occasions. To help prevent this, I designed a lockout to keep the switch in the OFF position. It is a simple print that…
I modified the original to work with the 10 degree base. Also moved the hole for the magnet to be embedded inside the base, since for me the original one in the bottom didn't do much. Might be because of the smaller magnet I used, since i…
Printed in PETG with 5 perimeters for added strength.
Building on the great work of @Alpenmeister_111725, I needed some more space in my hitbox for pico I had with headers already soldered on. It also gives it a slightly more chunky look, and a bolder base colour which you may or may not…
English Electric Lightning F6 Wall Art silhouette Model. Adjustable size. I accept model suggestions
Raises the edge of dosing cup to be closer to the grinder chute
It's my take on an grind indicator for DF64. It requires a zip tie to tighten.
Dosing cup holder for df64 gen 1 Inspired by @MP_899322 's design. Was designed to be used with metal cups Printed out laying down in ABS and PLA with supports 31 deg vs. grinder
I modified the Idler to support F688Z Bearing from Ender 3, and enlarged the counterweight for better counterweighting :) I also took the soldering iron holder and base from the below two models:…
A hanger for the DeWalt DCF680 featuring: trigger cutout allowing storage in both straight and angled grip configurations storage for spare battery - fits with or without protective cap storage for DeWalt tough case - keeps your bits at…
V02 - Updated the angle for the screw hole to make it 90° with the angle of the grinder, and made the bracket a bit longer to compensate with the new angle. - A simple bracket for the DF64 grinder to grind the coffee beans directly into…
T-Nut for Felder BF6-31 sliding table. Can be used to build hold down clamps, fasteners, jig mounts and so on. For use with M10 threaded nuts or bolts. Print Settings Printer: Cetus 3D Rafts: Yes Supports: Yes Resolution: 0.2 mm Infill:…
Solar filter for the Canon RF 200-800mm F6.3-9 IS USM lens. This solar filter fits nicely on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this on Amazon…
This 3D-printed cockpit for the DF65 sailboat offers extra rigidity and better weight distribution by relocating the actuators and battery. It's a quick upgrade for improved durability and handling on the water.
Adapter for the Baratza Vario/Forte, to mount the DF-64 bellows to it. The bellows can be bought from ali, for example here . 3D printed TPU bellows always broke for me after a month, so I was looking at a more permanent solution. The…
A minimal footprint gridfinity bin (4x2) that can hold the MF60 or MF70 WolfBox Air Duster. I wanted a model where the duster could hold any attachment, and all attachments are accessible. Not recommended for a shallow drawer. The modal…
I order FYSETC F6 V1.3 board and i need a enclosure, so i design one to sweet my needs. This is a Work In Progress, some things can still be changed. UPDATES: 25/04/2019: Step files included. 06/10/2018: F6_Case_Top_40mm_Fan.STL -------…
Designed to print on the Mk3 without parting; it fits diagonally. Model has holes underneath for feet, of which there are two versions included. I didn't notice the need for feet until I tried to adjust the grinder on a hard counter. You…
Easy to print and install adapter to hold a portafilter on the Turin/df64 grinder! Pair with the funnel or the best results. Print in PLA with .2mm layer height Print with supports on overhangs/enforcers (I didn't put supports in the main…
DF54 has two holes, against 1 in DF64, I remixed the original model. The two holes were fixed a little below the one in the version for DF64 so that the dosing cup can get closer to the chute. Publishing here for someone to print and test…
Fan for ventilate DF65 hull after sailing. 4020 turbo fan 5v, USB powered. You can print it in two parts without supports and glue them together. Or just print in one and use some supports…
I got a DF64 G-Iota, and i was not amused by the dial indicator of v4, it is good to have one but it should not scratch the surface. This little part is printed in 2 minutes and should prevent damage on the aluminium funnel.
This is a design I created for Flair Classic bottomless portafilter and DF64 coffee grinder. It serves as a stand accessory which you can put the portafilter on and grind your coffee in it. Since I'm new with 3d modeling and 3d printing,…
I didn't buy one with my df64v. modeled after a photo, so expect it to be incorrect. used as template. dont eat plastic.
This cupholder fits 58mm cups and probably others as well. It's slightly tilted and closer to the chute than the original one. It's designed so that you can just hang the cup off the top of it without needing to shove it in some slots.
A simple model to make it a breeze to take off DF64 lid. Instructions: Print the model. Attach it to the lid using double-sided tape. Enjoy!
Zębatka do całej grupy PSA Citroen Peugeot Renault Ford Fiat i innych koncernów stosujących silniczek Valeo F663746X podczas uszkodzenia najczęściej pada ta zębatka.
My CR10 is a bit modified and the Z steppers have been pushed away a bit from the normal position. This guide allows a wider range of distances but also covers the stock location. Use the bearing (F688ZZ Flanged) and screws (countersunk…
Cuscinetti lineari con flangia tonda serie LMF misure da LMF6UU - LMF8UU - LMF10UU - LMF12UU - LMF16UU - LMF20UU - LMF25UU - LMF30UU - LMF40UU - LMF50UU. Creati con solidworks con passaggio semplificato. per le misure complete consultare…
Bei dem originalen Deckel kommt es nach gut 30 Jahren zu Ermüdungserscheinungen am Gewinde. Da musste Ersatz her. Die Gummieinlage aus dem ursprünglichen Deckel sollte in diesen Deckel wider eingelegt werden. Behelfsweise kann auch ein…
Spool holder for the Easdry to use with F623-RS bearings and 3x77mm rod.
RDT and brush mount for the df64 Can be slid over grinder body when base is removed. BE CAREFUL, edges of grinder are very sharp (I cut myself pretty bad while attempting to put this on my grinder) Designed to fit a small spray bottle for…
NEW MODEL!!! Specially made for working with the new Lid V2 AV box JetFleet-F6 / Thor300 plates to make AV box compatible with JetFleet-F6 / Thor300 ESC For 3mm copper/alum sheet. Small circles: tap M3 for stud screw. Big circles:…
This Geneva mechanism uses F6901Z Flanged bearings to smoothly rotate when in operation. This model is great for learning how the Geneva mechanism works. It also makes a great desk fidget toy. It only requires you to print 3 very simple…
There aren't many F6 cases to choose from out there. I've tried a few, but they either ended up being too small, not fitting right, or were just a little too flimsily mounted for my liking. So here is my shot at it. THIS IS A WIP. I have…
I recommend to print on one side, try without and supports.
I'm still working on how I grind and transfer coffee and didn't want to replace the stock prongs on the grinder, so here is a drop in adapter. The inside diameter is 60mm.
Vixen dovetail (100mm long) for Canon RF 200-800mm F6.3-9 IS USM lens. This attaches to the foot. I'm using it to connect my lens to a SkyWatcher SolarQuest solar tracking mount. You'll need one 3/8-16 x ½ UNC and one ¼-20 x ½ UNC socket…
