1 / 2
Armstrong Performance Mast Shims
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a set of 3 shims for the Armstrong Performance Mast to move the nose of the board down.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
These shims are to move the board nose down on the Armstrong Performance Mast specifically to tune in for pump foiling and dockstart. The Armstrong Performance Mast has a built in rake angle of 1 degree which noses the board up so the 1 degree shim will bring the mast to a more neutral angle which is better for pumping.
I print these out of PETG with 4 walls, 30% infill, 5 bottom shell layers and 7 top shell layers.
Keep in mind that you might need extended 30mm bolts in the rear to compensate for the shim height.