Armstrong Performance Mast Shims
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of 3 shims for the Armstrong Performance Mast to move the nose of the board down.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
These shims are to move the board nose down on the Armstrong Performance Mast specifically to tune in for pump foiling and dockstart. The Armstrong Performance Mast has a built in rake angle of 1 degree which noses the board up so the 1 degree shim will bring the mast to a more neutral angle which is better for pumping.
I print these out of PETG with 4 walls, 30% infill, 5 bottom shell layers and 7 top shell layers.
Keep in mind that you might need extended 30mm bolts in the rear to compensate for the shim height.