Inside/Outside Radius Gauge
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.91 – €1.11 net (excluding VAT)
For file: radiusGauge_PETG_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.01 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 57 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a radius gauge that includes both concave and convex references.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 262
- Makes
- 8
- Views
- 849
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Includes radius's from 1mm to 10mm. Note that I added a chamfer to ensure squish of the first layer doesn't compromise the accuracy so ensure you keep the tool square to the object being measured and use the center of the tool (not the top or bottom planes) for measurement.
Depending on the filament used, you may need to reduce non-external perimeter width to 0.4 (under Print Settings --> Advanced) to get the numbers to show well.
[Update] I made another complementary tool with +0.5mm on all radii here (https://www.prusaprinters.org/prints/149232) as I quickly found that 1mm was too coarse.[/Update]
Recommend printing at 0.2mm layer height.