AMBITFUL XF23mm F1.4 Teleprompter Ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom adapter ring for Ambitful teleprompter to fit Fujinon XF23mm F2 lens when 49 mm stock rings do not work.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a custom adapter ring created for use with the Ambitful teleprompter and the Fujinon XF23mm F2 lens. The stock adapter ring set starts at forty nine millimeters and does not attach securely to this lens. I designed a precisely measured replacement that allows centered mounting without any stress on the filter thread.
This part is not a step up or a step down ring. It locks by gripping the tiny external grooves located on the outer barrel of the lens instead of using the filter thread. This means the connection relies on controlled friction and does not apply twisting force to the thread.
The model fits firmly and supports correct optical alignment for video use. A material with slight flexibility is recommended such as PLA PETG or ABS. I have personally printed it using PLA and it worked correctly. The print consumes around four meters of filament with an approximate weight of twelve grams. If your printer tolerance creates a tight or loose fit you may test with one or two percent scaling adjustments.
Tolerance may differ based on printer calibration ambient temperature and slicer settings.