Case for USB PD Sink board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small case for one of the inexpensive USB C power delivery decoy boards (303pdsink01).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 55
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Small case for one of the inexpensive USB C power delivery decoy boards (303pdsink01). These boards are labelled “PDSink” and “303pdsink01”, and support pulling 5V, 9V, 12V, 15V, or 20V from a PD (Power Delivery) USB port via USB C.
This case uses two sets of M2 screws and nuts to hold the halves together. The minimum required screw length is probably 15mm; ones shown in the photos are M2x16mm.
The slot that the output wires pass through is 2mm high. The .scad file can be modified in OpenSCAD if you need it larger or smaller.