Jezrien's Honorblade - Dummy 13

We chose this burden willingly. Well, we can choose to drop it if we wish.

-Jezrien, The Way of Kings by Brandon Sanderson

This model is based upon the artwork of Antti Hakosaari, Ari Ibarra, and others. 


Please consider supporting me to further my 3D printing goals.
https://ko-fi.com/davidmcfarland23516

If you've ever wanted to dress up your Dummy 13 as the Herald of Kings, then you'll definitely either need a Dummy-13 bottle of hard liquor, or this Honorblade - timeframe depending. Or, perhaps you wish for your immaculately dressed Dummy-13 to be well equipped to kill a king? 

In any case, use supports for this model. Lay it flat on one side of the blade, but definitely use supports for this model. The weak of the blade will not contact the build-plate and is at a very steep angle. I tried printing this vertically every which way, because I don't like needing supports - but this and several of the other honorblades will need supports. 

NOTE: In accordance with Brandon Sanderson's Copyrights, under no circumstances are these files or prints from these files allowed to be used in any commercial fashion; that is, no one may make money from these in any way. 


If you're looking to collect and display the whole set, you can find them here:
Honorblade Stand
Battar's Honorblade
Chanarach's Honorblade
Ishar's Honorblade
Jezrien's Honorblade
Kalak's Honorblade
Nale's Honorblade
Pralla's Honorblade
Shalash's Honorblade
Talenel's Honorblade
Vedel's Honorblade