Wall Mountable Sheet Music Stand

This provides a compact method of holding sheet music if you don't want to place a stand behind your keyboards. It does require plywood and 3M wall strips. 

Steps:
-3D print 2 copies of the file, one mirrored. It will fit on a Prusa Mk3 bed if you get the angle just right. 
-Cut 7 strips of 3mm plywood: 6 x 30mm strips and 1 x 26mm strips. I cut them 500mm long, but you can make them as long as you like. 
-Place some glue on the ends of the strips and insert them into the holes in the 3D printed parts, the narrow strip goes at the front. I used clear gorilla glue. 
-Once the glue has dried, fit the 3M velcro strips to the 3D printed parts and mount the assembly to your wall. 

I printed from PLA with a 0.2mm layer height and 0.4mm nozzle.