Wall Mountable Sheet Music Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact, wall mountable sheet music stand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
This provides a compact method of holding sheet music if you don't want to place a stand behind your keyboards. It does require plywood and 3M wall strips.
Steps:
-3D print 2 copies of the file, one mirrored. It will fit on a Prusa Mk3 bed if you get the angle just right.
-Cut 7 strips of 3mm plywood: 6 x 30mm strips and 1 x 26mm strips. I cut them 500mm long, but you can make them as long as you like.
-Place some glue on the ends of the strips and insert them into the holes in the 3D printed parts, the narrow strip goes at the front. I used clear gorilla glue.
-Once the glue has dried, fit the 3M velcro strips to the 3D printed parts and mount the assembly to your wall.
I printed from PLA with a 0.2mm layer height and 0.4mm nozzle.