Hormann HSM4 Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3 variant models made from the original HSM4 Remote control bracket.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
I designed 3 models based of an original HSM4 remote holder.
Model 1 removes the screw hole and clip clamp providing a flat surface to stick the holder against any surface using double sided tape.
Model 2 is an “exact” replica of the original model.
*exact meaning most measurements were taken with a caliper, but some had to be changed to enable physical strength or orientation to 3D print!
Model 3 is the same as model 2, but with some changes to the back side to ensure better printer compatibility!
In case something doesn't fit right away, please let me know and I will provide updated models!
Only the fitment of the remote itself is tested, the screw hole and clip slot are based of of measurements.
Printing:
The model can easily be printed on its back with a few auto tree supports.
0.2mm PLA standard settings is plenty for this model!