Hormann HSM4 Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 variant models made from the original HSM4 Remote control bracket.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
I designed 3 models based of an original HSM4 remote holder.
Model 1 removes the screw hole and clip clamp providing a flat surface to stick the holder against any surface using double sided tape.
Model 2 is an “exact” replica of the original model.
*exact meaning most measurements were taken with a caliper, but some had to be changed to enable physical strength or orientation to 3D print!
Model 3 is the same as model 2, but with some changes to the back side to ensure better printer compatibility!
In case something doesn't fit right away, please let me know and I will provide updated models!
Only the fitment of the remote itself is tested, the screw hole and clip slot are based of of measurements.
Printing:
The model can easily be printed on its back with a few auto tree supports.
0.2mm PLA standard settings is plenty for this model!