Daewoo Refrigerator Drawer Guide Replacement (270 mm) – 3D Printable Part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed Daewoo fridge drawer guide, reinforced, fits original rail, reuses wheel, installs with original screw.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This custom replacement drawer guide is designed for Daewoo refrigerator models, restoring smooth and stable drawer movement with a robust and reliable 3D-printed part.
The geometry accurately matches the original factory guide while reinforcing key stress points to improve durability over time.
The model has been engineered with precise tolerances to ensure perfect alignment with the existing drawer rail system. It provides a simple and cost-effective solution for replacing worn or broken guides without the need for OEM hardware.
Printing Recommendations
- Material: PLA or PETG (PETG recommended for cold resistance)
- Layer height: 0.16–0.20 mm
- Infill: 30–40% (Gyroid or Cubic recommended)
- Perimeters: 3–4
- Supports: Not required on most printers
- Print orientation: Flat face down on the build plate
- ⚠ IMPORTANT: To create the guide for the opposite side of the fridge, apply a MIRROR operation in your slicer before printing.
Assembly & Installation
- Mount the printed part "clip-guia-DAEWOO" onto the main rail piece "guia_270mm-DAEWOO", just like the original assembly.
- Remove the damaged or defective original guide from the refrigerator.
- Take the wheel from the old guide and install it onto the new printed model.
- Insert the new guide into the fridge, clip it into its slot, and tighten it in place using the original screw.
Notes
This model has been created using direct measurements from an authentic Daewoo guide. It is designed to be a practical, long-lasting replacement to restore full drawer functionality without needing to purchase manufacturer parts.
- The Fusion 360 project file is included, allowing users to modify or adapt the design as needed.