Santa & Happy Elf Holiday Statue

Bring holiday cheer right onto your desk with this adorable Santa & Elf Christmas Statue!
Designed with smooth curves, crisp facial details, and a clean snowy base, this print comes out beautifully on the K1 Max. Santa leans in with a warm smile while his little elf proudly stands by his side — making it perfect for collectors, gift-givers, or anyone who loves Christmas decor.

This model is crafted to print clean with minimal supports, excellent surface detail, and a stable base for display. Add paint, multicolor filament, or leave it natural for a classic 3D-printed aesthetic!

🔧 TOP K1 MAX SETTINGS (PERFECT RESULTS)

These settings give you clean layers, crisp faces, and smooth hats/beards:

Quality

Layer Height: 0.20mm (or 0.16mm for extra detail)

Wall Thickness: 1.2mm (3 walls)

Top/Bottom Layers: 4–5

Speeds

Print Speed: 180 mm/s

Outer Wall Speed: 40–60 mm/s (important for clean faces!)

Support Speed: 120 mm/s

Travel Speed: 250 mm/s

Cooling

Fan Speed: 100% after 0.8mm height

Minimum Layer Time: 5–7 sec

Infill

Infill %: 12–18%

Infill Type: Gyroid or Grid

Supports (recommended for best detail)

Type: Tree Supports

Support Density: 10–12%

Support Overhang Angle: 55°

Support XY Distance: 0.40mm

Z Distance: 0.20mm

Build Plate

Adhesion: Brim (5mm) for stability

Bed Temp: 50–55°C

Nozzle Temp: 215–225°C PLA / PLA+

K1 Max Special Tips

Enable Input Shaping

Use Flow Calibration 0.98–1.00

Lower outer wall acceleration for smoother beards/hats:

Outer Wall Accel: 800–1200